How to use Replace in G-CODE
Replaces commands in a G-code file with other commands, or removes them. Write one replacement per line as old=new; leave the right side empty to remove a command.
Open the appSettings
Basic input data
| Setting | What you enter | Default |
|---|---|---|
| Upload your file required | EIA, NC, CNC, TXT, GCODE file, up to 50 MB | – |
| Replacement commands required | Text, several lines | – |
What you get
- Download Generated G-CODE file (.GCODE)
- Download Generated G-CODE file (.TXT)
- Download Generated G-CODE file (.NC)
Worked example
Source file
G21
G90
G00 X150 Y150
M1002
G01 X150 Y0
G01 X0 Y0
G01 X0 Y150
G01 X150 Y150
M08
G00 X0 Y0
M02Replacement commands
M1002=M500
M08=M1002 becomes M500 and M08 is removed.
Result
G21
G90
G00 X150 Y150
M500
G01 X150 Y0
G01 X0 Y0
G01 X0 Y150
G01 X150 Y150
G00 X0 Y0
M02